Exploring the feasibility of smartphone cameras for 3D modelling of bite patterns in forensic dental identification.

The field of bitemark analysis involves examining physical alterations in a medium resulting from contact with teeth and other oral structures. Various techniques, such as 2D and 3D imaging, have been developed in recent decades to ensure precise analysis of bitemarks. This study assessed the precision of using a smartphone camera to generate 3D models of bitemark patterns. A 3D model of the bite mark pattern was created using 3Shape TRIOSTM and a smartphone camera combined with monoscopic photogrammetry. The mesiodistal dimensions of the anterior teeth were measured using Rapidform Explorer and OrtogOnBlender, and the collected data were analyzed using IBM® SPSS® Statistics version 23.0. The mean mesiodistal dimension of the anterior teeth, as measured on the 3D model from 3Shape TRIOSTM and smartphone cameras, was found to be 6.95 ± 0.7667 mm and 6.94 ± 0.7639 mm, respectively. Statistical analysis revealed no significant difference between the two measurement methods, p > 0.05. The outcomes derived from this study unequivocally illustrate that a smartphone camera possessing the specific parameters detailed in this study can create a 3D representation of bite patterns with an accuracy level on par with the outputs of a 3D intraoral camera. These findings underscore the promising trajectory of merging smartphone cameras and monoscopic photogrammetry techniques, positioning them as a budget-friendly avenue for 3D bitemark analysis. Notably, the monoscopic photogrammetry methodology assumes substantial significance within forensic odontology due to its capacity for precise 3D reconstructions and the preservation of critical measurement data.

OPG-based dental age estimation using a data-technical exploration of deep learning techniques.

Dental age estimation, a cornerstone in forensic age assessment, has been extensively tried and tested, yet manual methods are impeded by tedium and interobserver variability. Automated approaches using deep transfer learning encounter challenges like data scarcity, suboptimal training, and fine-tuning complexities, necessitating robust training methods. This study explores the impact of convolutional neural network hyperparameters, model complexity, training batch size, and sample quantity on age estimation. EfficientNet-B4, DenseNet-201, and MobileNet V3 models underwent cross-validation on a dataset of 3896 orthopantomograms (OPGs) with batch sizes escalating from 10 to 160 in a doubling progression, as well as random subsets of this training dataset. Results demonstrate the EfficientNet-B4 model, trained on the complete dataset with a batch size of 160, as the top performer with a mean absolute error of 0.562 years on the test set, notably surpassing the MAE of 1.01 at a batch size of 10. Increasing batch size consistently improved performance for EfficientNet-B4 and DenseNet-201, whereas MobileNet V3 performance peaked at batch size 40. Similar trends emerged in training with reduced sample sizes, though they were outperformed by the complete models. This underscores the critical role of hyperparameter optimization in adopting deep learning for age estimation from complete OPGs. The findings not only highlight the nuanced interplay of hyperparameters and performance but also underscore the potential for accurate age estimation models through optimization. This study contributes to advancing the application of deep learning in forensic age estimation, emphasizing the significance of tailored training methodologies for optimal outcomes.

Bitemarks and 3D scanner: An objective comparison for bitemarks. A pilot study.

The marks left by the bite of a subject (bitemark) represent an unequivocal character, being useful in identifying the possible perpetrator of a crime. To date, the analysis of bitemarks is mainly based on the direct vision of photographic finds and on the visual comparison with the teeth of the hypothetically responsible person. However, the bitemark also retains three-dimensional characteristics detectable with a 3D scanner. In this pilot study, an innovative method of bitemark analysis, utilizing a three-dimensional scanner and some software, will be introduced, enabling a quantitative comparison of bitemarks and their corresponding human dentitions. For this purpose, 10 complete plaster models (human dentitions) of 10 adult subjects were used to make 20 experimental bitemarks on dentistry wax. All materials were individually scanned with the iTero® 3D scanner and reworked with MeshMixer software. A visual analysis of the characteristics and a computerized analysis with the CloudCompare software were also performed. Study showed a different trend of the distribution curves of the points which were obtained comparing the human dentition and coincident and non-coincident bitemarks. Current results support that the intraoral 3D scanner allows the fast record and the preservation of the three-dimensional characteristics of the bitemarks, and it allows computerized analyses to be carried out.

Dental age estimation by assessing the pulp volume of five teeth in a peruvian population using cone beam computed tomography images / Estimación de la edad dental evaluando el volumen pulpar de cinco dientes utilizando imágenes de tomografías computarizadas de haz cónico en una población peruana

Abstract Dental age estimation is very important for individual identification in criminal and civil forensic investigations. One of the methods for age estimation is studying age related changes in pulp volume of teeth. The objective of the current study was to estimate dental age from the pulp volume of five different categories of teeth of a Peruvian sample using cone beam computed tomography (CBCT). Retrospective CBCT records of 231 patients (females (134), males (97), age: 12-60 years) were included in the study, categorized into five different age groups (12-19, 20-29, 30-39, 40-49, 50-59, 60 years and older). Dental pulp volume of five categories of teeth(upper canines, left upper central incisors, left upper first molars, lower left first premolars, first molars) were analyzed using Romexis® 5.3.3.5 software for each patient. There was a reduction in the pulp volume of upper right and left canine with age. The Pulp volume was lowest in people aged 60 years and over. Linear regression analysis of the pulp volume and chronological age showed a coefficient of determination of 30%, suggesting a weak correlation. A weak correlation between dental pulp and age is derived. But, a robust large homogenous sample of teeth in future for different age groups may establish a reliable regression equation.

Resumen La estimación de la edad dental en personas vivas y cadáveres es muy importante para la Odontología Forense, sobre todo en casos de identificación en investigaciones legales y sociales. El objetivo del estudio fue estimación de la edad dental mediante la medición del volumen pulpar de imágenes dentales en tomografía computarizada de haz cónico (TCHC) de pacientes peruanos. Fueron analizadas 231 TCHC de pacientes entre 12 a 60 años a más. (Mujeres (134), hombres (97)) se dividieron en seis grupos de edad (12-19, 20-29, 30-39, 40-49, 50-59, 60 años a más). El análisis volumétrico de la pulpa dental se realizó en un total de 1155 dientes (caninos superiores, incisivos centrales superiores izquierdos, primeros molares superiores izquierdos y primeros premolares inferiores izquierdos), mediante el software Romexis® 5.3.3.5. El análisis de regresión lineal mostró un coeficiente de determinación del 30% que sugiere una correlación débil entre la relación del volumen pulpar de los dientes y la edad. El volumen pulpar de los caninos superiores derecho e izquierdo disminuyó a medida que aumentaba la edad y el volumen pulpar en dientes de personas de 60 años a más fue el más bajo. Sin embargo, se pueden proponer estudios futuros para incluir una gran muestra homogénea de dientes en diferentes categorías y grupos de edad para confirmar la correlación y establecer una ecuación de regresión confiable.

[Forensic dentistry for identity verification. A survey at the state police level]. / Verwendung von forensischer Zahnmedizin zur Identitätsfeststellung. Eine Befragung auf Ebene der Länderpolizei.

BACKGROUND: In Germany, the identification of unknown dead persons is the responsibility of the police. According to INTERPOL standards, primary (e.g., DNA, fingerprints, and teeth) and secondary (e.g., tattoos) characteristics are examined. Forensic dentistry is already used internationally as an efficient method. In this study, the approach of state police in Germany was analyzed. The methods used for identification, the role of forensic dentistry, the cooperation with dentists, and possible optimization approaches are investigated. METHODS: By means of a digital questionnaire, police officers competent in all federal states for the discovery of unknown dead bodies were asked about identification methods and specifically about the use of forensic dentistry. RESULTS: Eighty-five officers from at least 11 federal states participated in the survey. The procedure turned out to be department specific. In 72.6% of the cases, different characteristics are combined in the identification process, most frequently DNA with dental status (37.1%). DNA analysis is used most frequently. Of the respondents, 62.9% agreed that dental identification is used "often." The percentage of identifications using dental status is estimated to be 1.6-8.1%. For forensic dentistry, 19.4% have a fixed point of contact. A digital platform to contact dentists was estimated to be helpful by 56.5%. DISCUSSION: Forensic dentistry is currently still lagging behind DNA analysis, which could change through increasing digitalization if, for example, ante-mortem data are more reliably available and platforms for interdisciplinary exchange are created.

[Chromatographic analysis of hard tooth tissue to determine the age of personality]. / Khromatograficheskii analiz tverdykh tkanei zuba v tselyakh opredeleniya vozrasta lichnosti.

The biochemical approach for age assessment is most appropriate in forensic medicine, as racemization of aspartic acid in bones and teeth is closely related to human biological age. The aim of the study is to assess the biochemical parameters of aspartic acid in human teeth, which can be implemented into forensic practice in Russia. Samples of dentin in amount of 20, taken from the teeth of subjects aged between 16 and 76, were examined. Chromatographic analysis of the samples was performed on a gas chromatograph using chiral column. Statistical data processing showed that the relative squared peak of D-aspartic acid has a strong correlation with human biological age. Data, obtained from the Russian population study, demonstrate the applicability of chromatography for forensic purposes. It should be noted that the approach to the racemization rate estimation in the hard tooth tissue was performed using standard laboratory equipment, which allows to easily implement this method in forensic medical practice.

La odontología en la identificación de sucesos con víctimas múltiples / Forensic odontology in human identification in multiple victims’ incidents

La aprobación en 2009, del Protocolo Nacional de actuación Médico-Forense y de Policía Científica en sucesos con víctimas múltiples, supuso la base normativa para regular formalmente los procedimientos y técnicas que deben aplicarse, como las distintas tareas forenses que se tienen que realizar en los supuestos de sucesos con víctimas múltiples en España. En este artículo se revisan los procedimientos y métodos que se emplean en odontología forense para la identificación humana en casos de grandes catástrofes con múltiples víctimas. Dado que el reconocimiento de las características individualizadoras de las piezas dentarias, y en general los datos bucodentales, supone un proceso altamente especializado, resulta imprescindible el apoyo técnico de odontólogos/as forenses con experiencia en este campo, quienes dispondrán de la formación y los conocimientos necesarios para la realización de la toma de registros dentales, la interpretación precisa de los resultados y la obtención adecuada de las conclusiones. Finalmente se incluyen recomendaciones para la elaboración de los informes forenses de identificación odontológica. (AU)

The approval in 2009, of the Protocolo Nacional de actuación Médico-Forense y de Policía Científica en sucesos con víctimas múltiples, was the basic normative to formally regulate both the technical procedures that must be applied, and the different tasks to be carried out in a disaster victim incident in Spain. This article reviews the procedures and techniques used in forensic odontology for human identification in DVI incidents with multiple victims. Given that the recognition of the individualizing characteristics of the teeth, and in general the odontological data, supposes a highly specialized process, it is essential the assistance of forensic dentists with experience in this field, who will have the training and the knowledge to carry out the dental procedures such as documenting dental records, accurate interpretation of the results and withdraw precise dental identification conclusions. Finally, recommendations for the preparation of forensic dental identification reports are included in this review. (AU)

Preliminary study on genetic factors related to Demirjian's tooth age estimation method based on genome-wide association analysis.

The age determination of individuals, especially minors, is critical in forensic research. In forensic practice, dental age estimation is one of the most commonly used methods for determining age as teeth are easy to preserve and relatively resistant to environmental factors. Tooth development is affected and regulated by genetic factors; however, these are not incorporated into current commonly used tooth age inference methods, leading to unreliable results. Here, we established a Demirjian and a Cameriere tooth age estimation-based methods suitable for use in children in southern China. By using the difference between the inferred age and the actual age (MD) as the phenotype, we identified 65 and 49 SNPs related to tooth age estimation from 743,722 loci among 171 children in southern China through a genome-wide association analysis (p<0.0001). We also conducted a genome-wide association study on dental development stage (DD) using the Demirjian tooth age estimation method and screened two sets of SNP sites (52 and 26) based on whether age difference was considered. The gene function enrichment analysis of these SNPs found that they were related to bone development and mineralization. Although SNP sites screened based on MD seem to improve the accuracy of tooth age estimation, there is little correlation between these SNPs and an individual's Demirjian morphological stage. In conclusion, we found that individual genotypes can affect tooth age estimation, and based on different phenotypic analysis models, we have identified some novel SNP sites related to tooth age inference and Demirjian's tooth development stage. These studies provide a reference for subsequent phenotypic selection based on tooth age inference analysis, and the results could possibly be used in the future to make forensic age estimation more accurate.

Dental age assessment: scoring systems and models from the past until the present-how is it presented in the court?

OBJECTIVE: The aim of this study is to evaluate the accuracy of the methods from the past and present, such as Demirjian, Cameriere, and AlQahtani, as well as to determine the most reliable method for human age estimation under the request from the courts according to the effect size from each method in age estimation. DESIGN: Four hundred eighty-three orthopantomographic images were selected from 318 patients from Centro Hospitalar Universitário Lisboa Norte aged between 6 and 15 years old. Several measurements of widths and lengths and classification of tooth development stages were performed, according to each age estimation method. The listing of patients and orthopantomographic images were consulted through SECTRA®. All data was entered and analysed using SPSS version 28. Observations' validity was verified through inter- and intraobserver validation. RESULTS: The correlation coefficients between age and age estimates by the three methods on both sides were close to 90%. Regarding the estimation error correlation coefficient, Demirjian and AlQahtani values were low, whereas Cameriere's was significantly negative; i.e., underestimation increases as age increases. Between left and right, any significant difference in age estimation in AlQahtani and Cameriere methods was not observed, but there were great variability and large effect for the Demirjian method. Comparing females and males, the statistical analysis showed no significant differences and quite small effects in the precision of the estimates for any of the methods. Finally, although significant differences were detected when comparing estimated values and age, small effects were revealed except for the Demirjian method which attained a medium effect and, therefore, less consistency of estimation. CONCLUSIONS: Since it was not possible to determine the most reliable method for age estimation, a combined application of different age estimation methodologies is recommended to be use in the courts with relevant statistical data such as effect size.

Development of formulae for dental age estimation using digital radiographs in the Mongolian population.

This study aimed to examine the applicability of the pulp/tooth ratio (PTR) method for age estimation in Mongolian populations using panoramic radiographs and derive new regression formulae. Moreover, we aimed to assess the accuracy of these formulae in other subjects from the Mongolian population and compare them with the other formulae derived from different Asian populations. The total sample size of the study was 381. The formulae were derived from the examination of panoramic radiographs of 271 individuals aged 15-62 years. Following Cameriere's method, PTR was calculated for the upper and lower canine teeth. Linear regression analyses were performed between the actual age and that obtained from upper-lower canine PTR and established formulae for age estimation. To verify the formulae, two types of test samples were collected: 73 panoramic radiographs and 37 periapical radiographs. The estimated age was calculated using our new formulae and three other formulae derived from Asian populations. The correlation coefficient between the actual age and that obtained by PTR was significantly negative for both canines. According to our new regression formulae, the differences between the estimated age and actual age showed a bell-shaped curve distribution in both test groups. While using the other formulae derived from the Asian population, the distribution patterns obtained were significantly different in the Mongolian population. This study was the first to examine the relationship between actual age and PTR in Mongolian population, and these results advance the field of forensic science in Mongolia.

Technical note: A mobile collaborative workspace to assist forensic experts in disaster victim identification scenarios.

Integrated approaches to disaster victim identification (DVI) management have led to a need for technologies to improve interaction among parties involved in post-mortem (PM) and ante-mortem (AM) data collection through better communication and coordination. Mobile Forensic Workspace© (MFW) is a collaborative mobile system that not only facilitates the systematic collection of high-quality data, but also allows DVI professionals to coordinate activities and exchange data through secure real-time communication at major disaster scenarios in accordance with security, privacy and legal protocols. MFW is adaptable to any communication format (text, voice calls, photographs, etc.) and is dynamically self-reconfigurable when connectivity problems arise. It also allows data integration and backup through secure communication channels between local and remote servers. The feasibility of the system has been demonstrated through implementation of MFW on the iOS platform for iPhone, iPod Touch and iPad terminals. A further strength of MFW is that it provides out-of-the-box support for INTERPOL DVI forms. The application of information and communication technologies for DVI was shown to be useful in improving DVI management by enhancing the quality of data collection and enabling non-Internet dependent real-time data sharing and communication.

Root dentin translucency and age at death estimation in adults using single rooted teeth: Update of the Forensic International Dental Database.

Since the publication of Lamendin's age estimation technique, the root dentin translucency has received increasing attention as an important indicator of age. Recently, Parra and colleagues presented the Forensic International Dental Database (FIDB), a proposal to estimate age at death in adults based on Bayes theorem by applying the criteria of Lamendin's technique. The present study aims to update the procedure and to evaluate a new version of the method (named FIDBv2) using two control samples from Colombia and Greece. The performance of this new version was acceptable and suggests that the method is suitable for age at death estimation in adult individuals from different forensic contexts. The best approximations to chronological age were obtained for individuals between 30 and 60 years old, with errors less than 10 years. The age estimations calculated on control samples suggest the adequate performance of FIDBv2 on individuals from varied populations. It can be stated that the FIDBv2 constitutes a solid alternative to be used in contexts where no additional data are available. Here we reinforce the initial idea that this model for estimating age at death in adults may be generalizable to any forensic context in the world.

Forensic odontology and dental age estimation research: a scoping review a decade after the NAS report on strengthening forensic science.

Dental age estimation (DAE) is one of the most reliable and useful scientific methods employed by forensic odontology (FO) for human identification. In 2009, the US National Academy of Sciences (NAS) report highlighted the need to deepen research in many disciplines, among which FO received strong criticism for specific expertise. The aim of this review is to provide a comprehensive overview in order to systematically map the latest original research done in FO, as well as identify DAE within this field. A systematic search was performed from 2014 to 2019. In total, 644 studies were identified for qualitative analysis: DAE was the most studied topic (41.30%). Asia was the most productive continent with 58.27% of the global production on DAE; India was the most productive Asian country, with 32.33% and 55.48% of global and Asian production, respectively. The University of Macerata (Italy), KU Leuven (Belgium), University of Split (Croatia), and University of São Paulo (Brazil) led DAE research. Authors from leading countries on DAE research demonstrated great individual productivity, which is evidence of their scientific efforts, but also possible risks if the continuity of this line of research depends on them. Although FO has significantly focused its research on DAE, the absence of publications on controversial topics but necessary for research according to the NAS report shows the possible lack of interest of authors or journals to address them.

Undergraduate dental students and their potential role in disaster victim identification procedures: A scoping review under a Chilean perspective.

BACKGROUND: A mass fatality incident is an unexpected event that can cause the death of many people, which has motivated careful analysis and development of appropriate strategies for planning and response with all available resources. As these events involve multiple victims, their identities must be confirmed using the highest possible quality standards. Forensic Odontology (FO) has proven to be a scientific resource for disaster victim identification (DVI) procedures; however, it is highly dependent on the proper management not only of material resources but also of human resources. Chile is a country recognised as prone to natural disasters, but an insufficient number of forensic odontologists has been reported. The aim of the study was to review the literature on a dental undergraduate (UG) student's potential value in a DVI process. METHODOLOGY: A scoping review was performed using a specific search strategy in PubMed/Medline, Web of Science, Scopus, SciELO and EBSCO databases. RESULTS: The search identified 27 articles in which the basic dental degree, the necessary training and the need for human resources are variables considered in different priorities by those articles. DISCUSSION: It is vital to assess the local needs of Chile based on its UGs, considering that FO is an underestimated resource that should be included early on in dental curriculums. Furthermore, it should align with public policies to ensure viability and inclusion in standardised protocols. CONCLUSION: Although there is "potential" usage of UG dental students in DVI is not ideal, circumstances will dictate their use. The better trained they are as students, the more valuable their "potential" contribution will be.

3D segmentation of dental crown for volumetric age estimation with CBCT imaging.

In adult dental age estimation, segmentation of dental volumetric information from different tooth parts using cone-beam computed tomography (CBCT) has proven beneficial in improving the regression model reliability. This segmentation method can be expanded in the crown part since the volumetric information in the crown is affected by attrition in the enamel and secondary dentine in the dentine and pulp chamber. CBCT scans from 99 patients aged between 20 and 60 were collected retrospectively. A total of 80 eligible teeth for each tooth type were used in this study. The enamel to dentine volume ratio (EDVR), pulp to dentine volume ratio (PDVR) and sex were used as independent variables to predict chronological age (CA). The EDVR was not affected by PDVR. The highest R2 was calculated from the maxillary canine (R2 = 0.6). The current approach in crown segmentation has proven to improve model performance in anterior maxillary teeth.

Dental hygiene students' matching accuracy when comparing antemortem dental radiographs and oral photographs to simulated postmortem WinID3® odontograms.

Matching dental antemortem (AM) and postmortem (PM) data for human identification is especially challenging when the workforce is limited. Dental hygienists have served mass fatality incidents (MFIs) due to dental-related expertise. However, forensics within dental hygiene education and research on transferable skills is limited. This qualitative balance design study assessed senior dental hygiene students' match accuracy of simulated cases varying in dental identifiers based on AM full mouth series (FMS) radiographs and oral photographs to PM WinID3® odontograms to demonstrate possible disaster victim identification (DVI) transferable skills gained during formal education. A convenience sample of senior dental hygiene students (n = 31) was presented information on WinID3® interpretation, then presented with 5 mismatched cases and asked to visually interpret each to make 10 total matches; five based on AM FMS with simulated PM WinID3® odontograms and five based on AM photographs with PM WinID3® odontograms. Match accuracy scores ranged from 41.9% to 58.1% for cases with 1-10 identifiers, and 77.4% to 93.5% for cases with 11-40 identifiers. Accuracy when matching AM radiographs to PM odontograms versus AM photographs to PM odontograms was compared and revealed no statistical differences in match accuracy depending on image type (p = 0.388 to 1.000). Results of this pilot study suggests transferable match accuracy skills resulted from the participants' dental hygiene formal education. These baseline skills with additional specialized training support the rationale for dental hygienists serving on DVI teams. More research is needed in education and practice when preparing dental hygienists for forensic-based service.

Aspectos clínicos y forenses del color rosa de los dientes: reporte de un caso / Clinical and forensic aspects of the pink color of teeth: report of a case

La coloración rosa de los dientes puede originarse por diferentes factores. En el ámbito forense se ha descrito al fenómeno denominado post mortem pink teeth como un signo asociado a muertes violentas de etiología diversa. En la práctica clínica también es posible observar pacientes con dientes rosados, fre-cuentemente ocasionados por traumatismos o iatro-genia proveniente de ortodoncia, cuyo mecanismo de producción obedece a distintas etiopatogenias, destacándose las reabsorciones dentinarias inter-nas, cemento-dentinarias externas y calcificaciones dentinarias. El presente artículo expone el caso de un individuo adulto con antecedente de trauma óseo-dentario por accidente vial que, luego de un prolon-gado tiempo, asiste al Servicio de Urgencias Odon-tológicas y Orientación de Pacientes de la Facultad de Odontología de la Universidad de Buenos Aires, en donde se le detecta, a modo de hallazgo exploratorio, una ostensible coloración rosada en el canino infe-rior derecho. La situación motivó un pormenorizado abordaje clínico y radiográfico, indagando respecto a los probables factores que intervinieron en su ge-neración y desarrollo (AU)

The pink coloration of the teeth can be caused by dif-ferent factors. In the forensic field, the phenomenon called post mortem pink teeth has been described as a sign associated with violent deaths of various etiology. In clinical practice, it is also possible to ob-serve patients with pink teeth, frequently caused by trauma or iatrogenesis from orthodontics, whose production mechanism is due to different etiopatho-genesis, highlighting internal dentin resorption, ex-ternal cemento-dentinal resorption and dentin calci-fications. This article presents the case of an adult individual with a history of bone-dental trauma due to a road accident who, after a long time, attends the Dental Emergency and Patient Guidance Service of the Faculty of Dentistry of the University of Bue-nos Aires, where an ostensible pink coloration was detected in the lower right canine as an exploratory finding. The situation motivated a detailed clinical and radiographic approach, inquiring about the probable factors that intervened in its generation and development (AU)

Age Estimation Using Maxillary Central Incisor Analysis on Cone Beam Computed Tomography Human Images.

Forensic dentistry plays an important role in human identification, and dental age estimation is an important part of the process. Secondary dentin deposition throughout an individual's lifetime and consequent modification in teeth anatomy is an important parameter for age estimation procedures. The aim of the present study was to develop regression equations to determine age in adults by means of linear measurements and ratios on sagittal, coronal and axial slices of maxillary central incisors using cone bean computed tomography (CBCT). Multiplanar measurements of upper central incisors were taken for a sample of 373 CBCTs. Subsequently, one-way analysis of variance (ANOVA) and multivariate linear regressions were performed for age estimation. The equations obtained from axial linear measurements and ratios presented a standard error of the estimate (SEE) of ±10.9 years (R2 = 0.49), and a SEE of ±10.8 years (R2 = 0.50), respectively. The equation obtained for multiplanar linear measurements presented a SEE of ±10.9 years (R2 = 0.52), while the equation for multiplanar ratios presented a SEE of ±10.7 years (R2 = 0.51). Thus, CBCT measurements on upper central incisors were found to be an acceptable method for age estimation. Horizontal measurements, especially pulp measurements, improve the accuracy of age estimate equations.

"Identified", "probable", "possible" or "exclude": The influence of task-irrelevant information on forensic odontology identification opinion.

In a mass disaster situation, identification of the deceased utilising comparison of dental features is frequently heavily relied upon to facilitate rapid and accurate outcomes. The method consists of the comparison of clinical and radiographic records depicting oral structures and dentition to allow an opinion to be produced on a presumed identity. Current forensic odontology identification opinions are expressed as categories of levels of identification. Categories such as "Identified", "Probable", "Possible" and "Exclude" are used in various forensic odontology identification scales. The boundaries between the levels of the scales are not fixed; hence, category selection is highly subjective. It is uncertain how extrinsic factors such as exposure to contextual task-irrelevant information or operator experience influence category selection. In this study, forensic odontologist and dentist participants read task-irrelevant context case information containing either strong or weak identification or non-identification suggestions before evaluating and comparing pairs of true matching and non-matching dental radiographs. They were then asked to form an opinion regarding identification using one of four categories from the INTERPOL scale. Context information was found to influence categorical decisions. The magnitude and direction of influence depended on the type of participant, the true match status of the radiographs, and the strength and direction of bias of the context. The results of this study demonstrate the contextual effect and fluidity of the boundaries between the categories on the identification scale and highlight the need for stringent protocols to be developed regarding the use of these categorical scales to enable decision making to be more objective.

Dental Anomalies as Identification Strategies for Unknown Human Remains: Literature Review and Applications.

The unique hard and resilient nature of human teeth makes them useful for various forensic odontological examinations. Structural alterations, cultural modifications, pathological variations, and restorative material make them excellent forensic indicators about biological identity of the unknown deceased or living individuals. Variations in the anatomical details of teeth may be imprinted by defective dental development, traumatic damages, pathologies, and nonmasticatory or weaponry use of teeth during an individual's lifetime. Such imprints can be used for comparisons and identification in forensic anthropology. Deliberate dental alterations/modifications and mutilations practiced due to cultural or esthetic purposes have been reported from some contemporary human population groups as well as from some ancient documented skeletal collections. Willful dental modifications have been most commonly done by filling, drilling, grooving, grinding, staining, and chipping. These dental features may be useful only for differentiation of varied anthropological populations, but their forensic utility cannot be ignored, particularly when antemortem dental records are available for comparisons. Various dental developmental anomalies and defects, restorations, pathological signatures, and occupational markers definitely corroborate other methods of forensic identifications, but cannot be used as sole criteria for individualization of unknown human remains retrieved in medicolegal scenarios. This review article attempts to glean information about various characteristic features of teeth and their forensic significance to aid identification of unknown human dental remains found in forensic contexts; its concluding emphasis focuses on the role of such dental individualities in identification strategies for human remains excavated from an abandoned ancient well situated underneath a religious structure at Ajnala (Amritsar), India. The unique dental features, extrinsic staining of anterior teeth, low frequency of dental pathologies, and notched incisors of those excavated remains were suggestive of them belonging to slain sepoy from an historic military regiment.